industrial 3D model Assembly bearing press machine

    $150

    industrial 3D model Bearing assembly machine Non-standard automatic assembly bearing press machine (including BOM list) this automatic bearing hardware assembly machine, bearing assembly equipment and hardware housing, Working principle is the feed position on the left and right side followed by the unloading station. The first is the loading position of the bearing on the left. When the bearings are stacked, the lower part is clamped by the splitter. cylinder mix. So is the right side. Hardware products are parts that need to be assembled with bearings, which are also stacked and loaded. The preselect operator takes the bearings first, places the bearings in the center jig, then goes to the right pick up position, then puts the two parts together and presses them through the middle large cylinder. After each part is assembled, the product is taken away by the recovery cylinder at the back. This method of operation meets the needs of use and is also the simplest method
    Industry use: Equipment
    3D model Design software: SolidWorks
    3D model Version/edit: Solidworks2011
    3D model file format:step(stp) Sldprt Sldasm